VERNIS PELABLE PROTECTION
€0.00
Reference:
PROTECTION OF PAINT BOOTHS, SIGNPOSTS (DURING WORK TO AVOID DAMAGING THEM) AND ALL SURFACES REQUIRING PROTECTION, INCLUDING FLOORS.
DESCRIPTION :
LABO 9030 is a temporary, peelable, water-based coating specially designed to protect paint booths and airlocks.
LABO 9030 is designed to protect walls, floors and all equipment requiring protection.
LABO 9030 is highly resistant and peels off easily thanks to the thickness of the film rendered on application.
DIRECTIONS FOR USE :
LABO 9030 is available in a range of colors to suit different applications (please contact ACTALYS before ordering).
LABO 9030 is spray-gunned to ensure uniformity of film when applying it.
If the product is too thick, dilute with water - between 2 and 5% - for better spraying.
LABO 9030 can also be applied with a brush or gluing brush.
It is necessary to apply a thick film for better adhesion.
Drying time: 2 to 3 hours before using the booth.
Easy to clean with hot water.
PRECAUTIONS FOR USE :
Product for professional use. Consult the MSDS (only upon request).
■ Case 4x5L
■ Jerrycans : 20 - 30L
■ Drums : 30L-60L-210L
■ IBC 1000L
The information present in our notices, letters and minutes are here to advise you, reporting in particular on tests carried out with a constant concern of objectivity but without any commitment on our part.
5 other products in the same category:
PROTECTION OF PAINT BOOTHS, SIGNPOSTS (DURING WORK TO AVOID DAMAGING THEM) AND ALL SURFACES REQUIRING PROTECTION, INCLUDING FLOORS.
DESCRIPTION :
LABO 9030 is a temporary, peelable, water-based coating specially designed to protect paint booths and airlocks.
LABO 9030 is designed to protect walls, floors and all equipment requiring protection.
LABO 9030 is highly resistant and peels off easily thanks to the thickness of the film rendered on application.
DIRECTIONS FOR USE :
LABO 9030 is available in a range of colors to suit different applications (please contact ACTALYS before ordering).
LABO 9030 is spray-gunned to ensure uniformity of film when applying it.
If the product is too thick, dilute with water - between 2 and 5% - for better spraying.
LABO 9030 can also be applied with a brush or gluing brush.
It is necessary to apply a thick film for better adhesion.
Drying time: 2 to 3 hours before using the booth.
Easy to clean with hot water.
PRECAUTIONS FOR USE :
Product for professional use. Consult the MSDS (only upon request).
■ Case 4x5L
■ Jerrycans : 20 - 30L
■ Drums : 30L-60L-210L
■ IBC 1000L
The information present in our notices, letters and minutes are here to advise you, reporting in particular on tests carried out with a constant concern of objectivity but without any commitment on our part.