HYGIWAX 26
€0.00
Reference:
ULTRA CONCENTRATED METALLIZED ACRYLIC EMULSION
DESCRIPTION :
Highly resistant emulsion especially adapted to cleaning methods based on spraying, HV polishing and washing. Protective film with a high polish, highly resistant to traffic, and non-slip. Made up of resins, acrylic polymers and self-polishing metallic ions. Active ingredients - 26%. HYGIWAX 26 can be used for all washable floor coverings: linoleum, vinyl, rubber and some porous tiles.
APPLICATIONS :
AREAS OF HEAVY TRAFFIC: AIRPORTS, HOSPITALS, SCHOOLS AND OFFICES, JUST TO NAME A FEW
METHOD OF USE :
Apply undiluted to dry, clean and neutral flooring at a temperature above 10°C. Spread two or three layers evenly using a brush applicator, a fringe mop or dampened wet mop. Yield 1 liter per 50 to 60 m2.
Allow 20 to 30 minutes between each layer to dry. The best results are obtained with three layers and high-speed polishing after drying of the last layer. This polishing procedure allows the emulsion to harden properly. Your floors will be protected and can be cleaned with neutral detergents, preferably ND ECO 2000 -
PRECAUTIONS :
Product for professional use. Consult MSDS (upon request only).
PACKAGING:
Case 4x5L
Drums 30L-60L-210L
The information present in our notices, letters and reports are here to advise you, reporting in particular on tests carried out with a constant concern of objectivity but without any commitment on our part.
16 other products in the same category:
ULTRA CONCENTRATED METALLIZED ACRYLIC EMULSION
DESCRIPTION :
Highly resistant emulsion especially adapted to cleaning methods based on spraying, HV polishing and washing. Protective film with a high polish, highly resistant to traffic, and non-slip. Made up of resins, acrylic polymers and self-polishing metallic ions. Active ingredients - 26%. HYGIWAX 26 can be used for all washable floor coverings: linoleum, vinyl, rubber and some porous tiles.
APPLICATIONS :
AREAS OF HEAVY TRAFFIC: AIRPORTS, HOSPITALS, SCHOOLS AND OFFICES, JUST TO NAME A FEW
METHOD OF USE :
Apply undiluted to dry, clean and neutral flooring at a temperature above 10°C. Spread two or three layers evenly using a brush applicator, a fringe mop or dampened wet mop. Yield 1 liter per 50 to 60 m2.
Allow 20 to 30 minutes between each layer to dry. The best results are obtained with three layers and high-speed polishing after drying of the last layer. This polishing procedure allows the emulsion to harden properly. Your floors will be protected and can be cleaned with neutral detergents, preferably ND ECO 2000 -
PRECAUTIONS :
Product for professional use. Consult MSDS (upon request only).
PACKAGING:
Case 4x5L
Drums 30L-60L-210L
The information present in our notices, letters and reports are here to advise you, reporting in particular on tests carried out with a constant concern of objectivity but without any commitment on our part.