KIT DE RÉPARATION EPOXY
€0.00
Reference:
FOOD CONTACT COMPLIANCE
DESCRIPTION:
Epoxy resin stick filled with copper that can be mixed by hand. The mixture obtained in 1 minute is applied on most clean and degreased substrates such as ferrous or non-ferrous metals, aluminium alloys, wood, PVC, Plexiglass... The product comes in the form of a 120-gram stick. Its consistency, comparable to that of a mastic, allows applications without soiling, casting or the use of tools. Resistant to hydrocarbons, ketones, alcohols, esters, salt water, diluted acids and bases. Suitable, after polymerization, for the passage of drinking water (“Intertek Testing” approval and certification N°MA3156/P).
TECHNICAL CHARACTERISTICS:
Storage stability: 6 months minimum at 20°C
SHORE D hardness (after 24H): 80
Tensile strength: 400 Kg / cm2
Operating temperatures: continuous 120°C, intermittent 150°C
INSTRUCTIONS:
In order to ensure optimal adhesion, the surface to be treated must be clean and free of grease and dirt. The use of an abrasive or sandblasting before cleaning considerably helps to ensure a good adhesion surface.
- Cut or tear off the desired quantity of resin.
- Knead by hand until a uniform colour is obtained. If mixing is difficult, reheat to normal room temperature.
- Apply firmly onto the surface to be repaired for two minutes after mixing to allow the product to penetrate into cracks and cavities.
- Scrape off excess material with, preferably, a tool moistened with clean water.
When applying to misted up or wet surfaces, press the product firmly against the surface until adhesion appears. To obtain a beautiful appearance, smooth with wet fingers or with a damp cloth before curing.
- Remove excess resin before curing begins. The product becomes hard as metal after 5 to 10 minutes. After 30 minutes, it has reached its optimal hardness and can be drilled, filed, tapped, sanded, painted... The unused part of the stick remains stable for years if it is protected from direct contact with the air.
USERS / APPLICATION FIELDS:
Can be used in many industrial and domestic repairs such as repairing steel pipes, tanks, tools and equipment, reconstituting nut or screw threads on site, repairing air vents, anchoring fasteners, repairing molds, castings and metal templates, locking screw assemblies, repairing cracks in cast iron, surfacing scratched or deformed parts, repairing gutters, as well as countless other applications.
REGULATIONS:
Danger. Observe and respect the precautions for use.
Compliant with Regulation (EC) No 1272/2008 and its adaptations. Consult the MSDS (upon request).
PRECAUTIONS:
H315 causes skin irritation. H317 can cause skin allergy. H319 causes severe eye irritation. H412 is harmful to aquatic organisms and has long-term adverse effects.
Complies with the modified decree of Sept. 8th 1999, relating to processes and products used for cleaning materials and objects intended to be brought into contact with foodstuffs, products and drinks for human and animal consumption.
PACKAGING:
80 syringes per case
80 sticks per case
The information present in our notices, letters and reports are here to advise you, reporting in particular on tests carried out with a constant concern of objectivity but without any commitment on our part.
16 other products in the same category:
FOOD CONTACT COMPLIANCE
DESCRIPTION:
Epoxy resin stick filled with copper that can be mixed by hand. The mixture obtained in 1 minute is applied on most clean and degreased substrates such as ferrous or non-ferrous metals, aluminium alloys, wood, PVC, Plexiglass... The product comes in the form of a 120-gram stick. Its consistency, comparable to that of a mastic, allows applications without soiling, casting or the use of tools. Resistant to hydrocarbons, ketones, alcohols, esters, salt water, diluted acids and bases. Suitable, after polymerization, for the passage of drinking water (“Intertek Testing” approval and certification N°MA3156/P).
TECHNICAL CHARACTERISTICS:
Storage stability: 6 months minimum at 20°C
SHORE D hardness (after 24H): 80
Tensile strength: 400 Kg / cm2
Operating temperatures: continuous 120°C, intermittent 150°C
INSTRUCTIONS:
In order to ensure optimal adhesion, the surface to be treated must be clean and free of grease and dirt. The use of an abrasive or sandblasting before cleaning considerably helps to ensure a good adhesion surface.
- Cut or tear off the desired quantity of resin.
- Knead by hand until a uniform colour is obtained. If mixing is difficult, reheat to normal room temperature.
- Apply firmly onto the surface to be repaired for two minutes after mixing to allow the product to penetrate into cracks and cavities.
- Scrape off excess material with, preferably, a tool moistened with clean water.
When applying to misted up or wet surfaces, press the product firmly against the surface until adhesion appears. To obtain a beautiful appearance, smooth with wet fingers or with a damp cloth before curing.
- Remove excess resin before curing begins. The product becomes hard as metal after 5 to 10 minutes. After 30 minutes, it has reached its optimal hardness and can be drilled, filed, tapped, sanded, painted... The unused part of the stick remains stable for years if it is protected from direct contact with the air.
USERS / APPLICATION FIELDS:
Can be used in many industrial and domestic repairs such as repairing steel pipes, tanks, tools and equipment, reconstituting nut or screw threads on site, repairing air vents, anchoring fasteners, repairing molds, castings and metal templates, locking screw assemblies, repairing cracks in cast iron, surfacing scratched or deformed parts, repairing gutters, as well as countless other applications.
REGULATIONS:
Danger. Observe and respect the precautions for use.
Compliant with Regulation (EC) No 1272/2008 and its adaptations. Consult the MSDS (upon request).
PRECAUTIONS:
H315 causes skin irritation. H317 can cause skin allergy. H319 causes severe eye irritation. H412 is harmful to aquatic organisms and has long-term adverse effects.
Complies with the modified decree of Sept. 8th 1999, relating to processes and products used for cleaning materials and objects intended to be brought into contact with foodstuffs, products and drinks for human and animal consumption.
PACKAGING:
80 syringes per case
80 sticks per case
The information present in our notices, letters and reports are here to advise you, reporting in particular on tests carried out with a constant concern of objectivity but without any commitment on our part.